The Nova 410 Series represent Nova's best value in continuous process O2 analysis. This analyzer utilizes a long-life electrochemical 'fuel cell' sensor for the detection of Oxygen in process gases. The sensor produces a small millivoltage output which is directly proportional to the Oxygen detected. The output is then amplified and displayed on a digital readout meter and can also be sent to an optional recorder output. The 410 can be supplied with sampling pump or pressure regulator to suit
410 Process O2 Analyzer
Method of Detection
|
Customer replaceable electrochemical 'fuel cell' O2 sensor. Expected life 3 to 5 years depending on typical measurement concentrations. |
Ranges Available
|
Any range from 0-2.0% to 0-100.0% O2 |
Resolution
|
0.1% O2 |
Accuracy & Repeatability
|
Below 30% O2 ±1% of full scale; above 30% O2 ±2% of full scale |
Drift
|
Less than 2% of full scale per month |
Response Time (T-90)
|
6-8 seconds to 90% step change |
Ambient Temperature Range
|
32 to 122°F (0 to 50°C), Lower temperatures (-5°F, -20°C) with Cold Weather Package |
Linearity
|
Below 30% O2 ±1% of full scale; above 30% O2 ±2% of full scale |
Size & Weight
|
Dimensions will vary depending on enclosure style and options required |
Power
|
115 VAC, 60 Hz220 VAC, 50 Hz |
Output Options
|
4-20 mA into 500 ohms non-isolated standardIsolated 4-20 mA, RS232, RS485, MODBUS, Ethernet outputs |
Alarms
|
High and/or low alarm contacts available, relay contacts SPDT 5A @ 220 VAC ratingLow flow alarm |
Analyzer Type
|
O2 Analyzer |
Primary Gas(es) to be Measured
|
Oxygen (O2) |
Hazardous Area Rating Options
|
General Purpose, Non-Hazardous |
|
For continuous analysis of oxygen (O
2
) in process gas streams. Also recommended for other applications such as O
2
enrichment of combustion air, flue gas analysis, oxygen deficiency analysis, and many more.
|
|
- Best value continuous O2 analyzer
- Bright digital readout
- Long life electrochemical O2 sensor
- Fast response (T90 - 6 to 8 seconds)
- Microprocessor control for push button calibration
- Easy-to-maintain modular layout
- Built in sample pump or pressure regulator
- 4 - 20 mA outputs
|