TOX 592 | Ados Vietnam

TOX 592 Sensor for Measuring the Concentration of Toxic Gases
Nhà sản xuất: ADOS Vietnam
0

TOX 592

Sensor for Measuring the Concentration of Toxic Gases

TOX 592

Application

The ADOS TOX 592 gas sensor is suitable for continuous measurement of a concentration of toxic gas in air, over the range of 0 – 20 ppm to 0 – 5000 ppm.

 

Fields of Application

  • In garages for measuring, control and warning, in conjunction with the MWS 906 CP tested to VDI 2053 standards
  • For monitoring at working places, to control the maximum concentration value e.g. in laboratories or motor test stands
  • In private and collective shelters for monitoring the external or internal air
 

Function Example, CO-sensor

The ADOS TOX 592 CO gas sensor uses a method of measurement where the air to be measured is diffused in a chemical measuring cell.


The (H+)-ions and the electrons released, are consumed at the electrode in a cathode reaction.

The flow of current between anode and cathode, generated by this process, is directly proportional to the CO-concentration in the measured air.

The sensor current is amplified and applied via a 4-20 mA field-bus to an evaluation unit, e.g. MWS 906 CP, where the measured variable is processed and indicated in ppm CO, together with any control and warning functions which may be necessary.
 

Example of measurable gases

GasFormulaMeasuring Range
Carbon monoxide CO 0 – 300 ppm
Ammonia NH3 0 – 200 ppm
Nitrogen dioxide NO2 0 – 30 ppm
Sulphur dioxide SO2 0 – 50 ppm
Hydrogen sulphide H2S 0 – 20 ppm

Other gases and measuring ranges on request.

 

 

 

Technical data

Measuring principle: Electro-chemical reaction
Measurable substance: Carbon monoxide
Measuring range: 0 – 150 ppm, 0 – 300 ppm, other measuring ranges upon request
Zero error: < 10 ppm CO
Reading instability: < 3 ppm CO 
Accuracy: ± 3%  of f.s.d.
Zero drift: < 2% per year
Repeatability:

< 2% per year

Linearity: < 2% of f.s.d.

Response time (t90):

< 60 seconds
Cross sensitivity:  < 2% with integrated filter
Interface: two-wire current interface
4–20 mA or LON® four-wire techniques, data transmission 78 kbps
Supply voltage: 15 V – 30 V
dependent on maximum load:
100 Ohm – 500 Ohm
Ambient temperature: -10 °C to +40 °C, with sensor temperature compensation
Humidity range: 10 – 99 %, non-condensing
Serviceable life of cell:  approx. 2 years
Protection class: IP 54
Sensor dimensions: diameter 80 mm,
height 80 mm
Weight: 600 g
Test certificate: To german standards, 
according to VDI 2053 in 
conjunction with MWS 906 CP