Professional set for humidity and temperature 
measurements in pressed bales of hay and straw

Features

• Practical and robust
• Humidity display in percent
• Visual humidity rating
• Specific characteristics for hay and straw, barley, wheat, reference curve for comparison measurement e.g. in silage
• Fast temperature measuring in probe tip

Applications

• Agriculture
• Hay and straw processing / stocking 
• Hay and straw trading 
• Cattle breeding 
• Horse keeping 
• Fire prevention 
•  …

 Specifications:

Professional set for humidity and temperature 
measurements in pressed bales of hay and straw

Features

• Practical and robust
• Humidity display in percent
• Visual humidity rating
• Specific characteristics for hay and straw, barley, wheat, reference curve for comparison measurement e.g. in silage
• Fast temperature measuring in probe tip

Applications

• Agriculture
• Hay and straw processing / stocking 
• Hay and straw trading 
• Cattle breeding 
• Horse keeping 
• Fire prevention 
•  …

 Specifications:

Description:

Instrument for fast material moisture measurement in bales and bulk materials. Universally applicable tool for damage prevention and quality assurance. Both display instrument and insertion probe had been optimized for the agricultural application especially for the following materials (the curves are preset):
    Hay, Flax
    Straw
    Wood Chips
    Grain: Wheat
    Grain: Barley 
A simplified moisture state evaluation is displayed in 9 steps

The 1 m insertion probe with integrated temperature sensor is very suitable to measure in hay or straw bales as well as in bulk material (grain, wood chips) By insertion material moisture and temperature are determined simple and fast. 
The main advantage of the system lies within the ability of comfortable measuring of many measuring spots (bottom, top, weather side...) within one stock in short time - without separate sampling – also moisture accumulations can be detected.
The fast and precise temperature measuring can be used to evaluate decomposition and fermentation processes even if the moisture is already above the measurable range of the instrument (as for example in silage…)

Specifications:

Display instruments GMH 3851:
Display range temperature: -40.0 ... +200.0 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
Sensor connections: BNC (moisture) and thermocouple type K socket (Temperature)
Data logger: 10000 measurings continuously or 99 manual measurings
Averaging: Average of 3 measurings wwill be calculated and displayed
User curves: 4 freely programmable user curves

Insertion probe GSF 50TFK:
Measuring range temperature: 0 ... +100 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
length: 43 cm

Scope of supply:
GSF 50 TFK incl. BNC/type K cable 1.5 m, GMH 3851  incl. Battery, GMH 38-LW – manual appendix and operating manual

Description:

Instrument for fast material moisture measurement in bales and bulk materials. Universally applicable tool for damage prevention and quality assurance. Both display instrument and insertion probe had been optimized for the agricultural application especially for the following materials (the curves are preset):
    Hay, Flax
    Straw
    Wood Chips
    Grain: Wheat
    Grain: Barley 
A simplified moisture state evaluation is displayed in 9 steps

The 1 m insertion probe with integrated temperature sensor is very suitable to measure in hay or straw bales as well as in bulk material (grain, wood chips) By insertion material moisture and temperature are determined simple and fast. 
The main advantage of the system lies within the ability of comfortable measuring of many measuring spots (bottom, top, weather side...) within one stock in short time - without separate sampling – also moisture accumulations can be detected.
The fast and precise temperature measuring can be used to evaluate decomposition and fermentation processes even if the moisture is already above the measurable range of the instrument (as for example in silage…)

Specifications:

Display instruments GMH 3851:
Display range temperature: -40.0 ... +200.0 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
Sensor connections: BNC (moisture) and thermocouple type K socket (Temperature)
Data logger: 10000 measurings continuously or 99 manual measurings
Averaging: Average of 3 measurings wwill be calculated and displayed
User curves: 4 freely programmable user curves

Insertion probe GSF 50TF:
Measuring range temperature: 0 ... +100 °C
Measuring range moisture: 0,0 ... 100,0 % u (referred to dry mass – depending on material curve)
length: 110 cm

Scope of supply:
GSF 50 TF incl. BNC/type K cable 1.5 m, GMH 3851  incl. Battery, GMH 38-LW – manual appendix and operating manual

Description:

Instrument for fast material moisture measurement in bales and bulk materials. Universally applicable tool for damage prevention and quality assurance. Both display instrument and insertion probe had been optimized for the agricultural application especially for the following materials (the curves are preset):
    Hay, Flax
    Straw
    Wood Chips
    Grain: Wheat
    Grain: Barley 
A simplified moisture state evaluation is displayed in 9 steps

The 1 m insertion probe with integrated temperature sensor is very suitable to measure in hay or straw bales as well as in bulk material (grain, wood chips) By insertion material moisture and temperature are determined simple and fast. 
The main advantage of the system lies within the ability of comfortable measuring of many measuring spots (bottom, top, weather side...) within one stock in short time - without separate sampling – also moisture accumulations can be detected.
The fast and precise temperature measuring can be used to evaluate decomposition and fermentation processes even if the moisture is already above the measurable range of the instrument (as for example in silage…)

Specifications:

Display instruments GMH 3830:
Display range temperature: -40.0 ... +200.0 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
Sensor connections: BNC (moisture) and thermocouple type K socket (Temperature)

Insertion probe GSF 50TFK:
Measuring range temperature: 0 ... +100 °C
Measuring range moisture: 0,0 ... 100,0 % u (referred to dry mass – depending on material curve)
length: 43 cm

Scope of supply:
GSF 50 TFK incl. BNC/type K cable 1.5 m, GMH 3830  incl. Battery, GMH 38-LW – manual appendix and operating manual

Scope of Supply:

• GMK 38 - Connecting cable 
• GHE 91 - Reciprocating piston electrode
• GST 91 - Steel nails (3 pcs each 12, 16, and 25mm long) in plastic case
• GTF 38 -  Temperature probe
• GKK 3500 - Plastic case

1 steel pin á 45 mm

For use with GSE 91 / GHE 91

1 steel pin á 60 mm

For use with GSE 91 / GHE 91

Application:
Humidity measurement and indication of Wood, GFK (glass fiber reinforced plastic)

Features:

• Non-destructive measurement
• Moisture display in percent
• Acoustical and visual moisture rating
• 14 material characteristics for wood and GFK
• 2 different measurement depth
• Backlight
• Detection-Mode

Specification:

Professional set for humidity measurements in pressed bales of hay and straw.

Features:

• Practical and robust
• Humidity display in percent
• Visual humidity rating
• Specific characteristics for hay and straw, barley, wheat and
  reference curve for comparison measurement e.g. in silage

Applications:

• Agriculture
• Hay and straw processing / stocking
• Hay ans straw trading
• Cattle breeding
• Horse keeping
• ...

Specification:

Professional set for humidity and temperature 
measurements in pressed bales of hay and straw

Features

• Practical and robust
• Humidity display in percent
• Visual humidity rating
• Specific characteristics for hay and straw, barley, wheat, reference curve for comparison measurement e.g. in silage
• Fast temperature measuring in probe tip

Applications

• Agriculture
• Hay and straw processing / stocking 
• Hay and straw trading 
• Cattle breeding 
• Horse keeping 
• Fire prevention 
•  …

 Specifications:

2 pieces, 15 mm long, Ø 3,8 mm

(for direct connection of measuring cable GMK 38)

2 pieces, 25 mm long, Ø 3,8 mm

(for direct connection of measuring cable GMK 38)

 2 pieces, 40 mm long, Ø 3,8 mm

(for direct connection of measuring cable GMK 38)

for measurement up to a depth of 107 cm, incl. 1 m connection cable

Suitable for:

• wood chips
• wood wool
• straw, hay, grain
• saw dust, etc.

 for measurement up to a depth of 107 cm, incl. 1 m connection cable

Suitable for:

• wood chips
• wood wool
• straw, hay, grain
• saw dust, etc.

 for measurement up to a depth of 40 cm, incl. 1 m connection cable

Suitable for:

• wood chips
• wood wool
• straw, hay, grain
• saw dust, etc.

for measurement up to a depth of 40 cm, incl. 1 m connection cable

Suitable for:

• wood chips
• wood wool
• straw, hay, grain
• saw dust, etc.

for measurement of pressed bales up to a depth of 60 cm, incl. 1 m connection cable.

Suitable for: pressed hay or straw bales, grain

Compact and robust measuring device for fast evaluation of material moisture in fi rewood, timber, flake board, inlay, plaster, cement and lots more. A suitable characteristic is selected with help of material table on the rear side of the device before measuring. The material is contacted by pressing the measuring needles into it. The measured value is displayed only a short time afterwards. The device is especially designed for precise fi rewood and timber measurements, however, a lot of additional building materials can be rated.

• Material tables on rear side of device
• Integrated, exchangeable measuring needles
• Moisture rating (wet/dry) via bar graph
• Display of material moisture or water content
• Integrated temperature compensation
• Characteristic curve display

Specification:

• Measuring principle:	resistive material moisture measurement acc. to DIN EN 13183
  Characteristic curves:	3 different wood groups (h.01, h.02, h.03) for a total of 130 wood types and 8 different building material curves (c.01, c.02, c.03, c.04, c.05, c.06, c.07, c.08)
  Moisture rating:	in 6 steps (wet … dry)
  Resolution:	0,1% (< 20 %), 1 % (> 20 %)
  Accuracy:  (at nominal temperature = 25 °C)	wood: ±0,2 % material moisture (Deviation to wood characteristic curve in range 6 … 20%) building materials: ±0,2 % material moisture (Deviation to corresponding characteristic curve)
  Display::	2 LCD displays for characteristic and measuring value
  Current consumption:	approx. 1.8 mA
  nominal temperature:	25 °C
  Dimensions::	110 x 67 x 30 mm + needles 26 mm
  Weight:	approx. 155 g

   

Description:

Instrument for fast material moisture measurement in bales and bulk materials. Universally applicable tool for damage prevention and quality assurance. Both display instrument and insertion probe had been optimized for the agricultural application especially for the following materials (the curves are preset):
    Hay, Flax
    Straw
    Wood Chips
    Grain: Wheat
    Grain: Barley 
A simplified moisture state evaluation is displayed in 9 steps

The 1 m insertion probe with integrated temperature sensor is very suitable to measure in hay or straw bales as well as in bulk material (grain, wood chips) By insertion material moisture and temperature are determined simple and fast. 
The main advantage of the system lies within the ability of comfortable measuring of many measuring spots (bottom, top, weather side...) within one stock in short time - without separate sampling – also moisture accumulations can be detected.
The fast and precise temperature measuring can be used to evaluate decomposition and fermentation processes even if the moisture is already above the measurable range of the instrument (as for example in silage…)

Specifications:

Display instruments GMH 3830:
Display range temperature: -40.0 ... +200.0 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
Sensor connections: BNC (moisture) and thermocouple type K socket (Temperature)

Insertion probe GSF 50TF:
Measuring range temperature: 0 ... +100 °C
Measuring range moisture: 0,0 ... 100,0 % u (referred to dry mass – depending on material curve)
length: 110 cm

Scope of supply:
GSF 50 TF incl. BNC/type K cable 1.5 m, GMH 3830  incl. Battery, GMH 38-LW – manual appendix and operating manual

Application:
Precision measurements in cut-wood, chip board, veneer, sawdust, wood chips, wood wool, flax, straw, hay, concrete, gas concrete, bricks, wash floor, cast, limestone mortar, cement mortar, paper, carton, textiles etc.

Specification:
Measuring range Temperature: -40.0 ... +200.0 °C (-40.0 ... +392.0 °F)
Measuring range Humidity: 0.0 …. 100 % u (material moisture)
                                           0.0 … 50 % w (water content)
                                           (depends on selected characteristic)
Sensor connection: BNC (Moisture) and thermovoltage-free NiCr-Ni socket (Temperature)
                                Working temperature: -25 ... 50 °C
Power supply: 9 V battery, additional socket for external 10.5-12 V direct current 
                       power supply
Functions: HOLD, Auto-Hold, Sort, Auto Power Off, Data logger, Real-time clock
Scope of supply: device, instruction manual, battery

for measurements of veneers or thin wood (up to approx. 10 mm)

Measuring cable necessary

for measurement of pressed bales up to a depth of 60 cm, incl. 1 m connection cable.

Suitable for: pressed hay or straw bales, grain

Features

• Non-destructive moisture measurement 
• Moisture display in %
• Acoustical and visual moisture rating
• Special material characteristics for wood and building materials
• 2 different measurement depths (10 mm und 25 mm)
• Backlight

Application

• Wood
• Concrete
• Screed
• Plaster

Technical Data:

The material moisture meter comes with a calibration protocol.

• Non-destructive measurement
• Fast estimation of the existence of moisture

Technical Specifications:

Field of application: e.g.:

• property management, house owners, etc.
• building contractors, building experts, architects
• mobile homes, polyester boats

Note: 
The GMI15 is an indicator for fast estimation of moisture. 
However, it does not replace a precision measuring instrument, like the type GMH 3830

• 466 charact. curves for sorts of wood
• 28 charact. curves for sorts of buliding materials
• Moisture estimation in 9 steps
• Integrated measuring needles
• incl. calibration protocol
  
  

  Measuring Range:	0,0 ... 100,0% weight humidity
  Measuring Probe:	2 mounts for needles M6 x 0,75 with 19mm measuring needles  (12mm usable length)
  Working Temperature:	-25...+50 °C
  Power Supply:	9V battery, IEC 6F22
  Features:	HOLD, Auto-Hold, Sort, Auto Power Off
  Scope of Supply:	Device with 10 measuring needles, manual, battery

  
  Due to the measuring needles, integrated in the fortified front plate, a multiplicity of measurements are possible without additional accessories.For measuring hard materials, we recommend the additional accessories, listed below.
  
  Aera of Use: Measuring the moisture of wood

Application:
Precision measurements in cut-wood, chip board, veneer, sawdust, wood chips, Wood wool, flax, straw, hay, concrete, bricks, wash fl oor, plaster, limestone mortar, cement mortar, paper, carton, textiles, wood chips, professional fi rewood humidity measurement, etc.

Specifications:
Measuring principle:
   Moisture: Resistive material moisture measurement acc. to DIN EN 13183-2:2002
   Temperature: external: thermocouple, NiCr-Ni (type K); internal: NTC
Characteristic curves: 494 material characteristics
Measuring range:
   Moisture: 0.0 …. 100 % u (material moisture), 0.0 … 50 % w (water content, wet basis)
(depends on selected characteristic)
   Temperature: -40.0 ... +200.0 °C (-40.0 ... +392.0 °F)
Moisture rating: 9 steps (dry ... wet)
Resolution: 0.1 % or 0.1 °C (0.1 °F)
Device accuracy: (at nominal temperature)
   Wood: ±0.2 % material moisture (deviation from corresponding characteristic curve in range 6 ... 30 %)   
   Building material: ±0.2 % material moisture (deviation from corresponding characteristic curve)
   Temperature: (external) ± 0.2 % of m.v. ± 0.3 °C

• GMK 38 - Connecting Cable
• GSE 91 - Impact electrode
• GST 91 - Steel nails (3 pcs each 12, 16 und 25mm long ) in plastic case
• GTF 38 - Temperature probe
• GKK 3500 - Plastic case

• GMK 38 - Connecting Cable
• GSE 91 - Impact electrode
• GST 91 - Steel nails (3 pcs each 12, 16 und 25mm long ) in plastic case
• GTF 38 - Temperature probe
• GMS 300/91 - Measuring pins, 300mm long
• GBSK 91 - Short brush-type probe (pair), 100mm
• GLP 91 - Conducting paste
• GKK 3500 - Plastic case

BNC to 2 x banana plug
approx. 90 cm long

Total Length:     230mm
Useful Length:   135mm
Width:                  16mm
Height:                 0.8mm

For use with:      GMK 38, GMK 3810