Lappro Automation > I/P Transducers | CairindiaVietnam

Manufacturers

View all

I/P Transducers | CairindiaVietnam | Lappro

“Cair” offers I/P Transducers (converter)

Manufacturer: CAIR euromatiic

Be the first to review this product

Quantity:

Description

Applications
	The Cair 500 IP series transducers converts electrical signal to a pneumatic output which can be used to operate the followings:
	Valve, Valve-Actuators
	Damper and Louver Actuators
	Valve Positioners
	Air-Cylinders
	Relays
	Clutches
	Web Tensioners and Brakes

	Used in:
	Petrochemical Processing Systems
	Energy Management
	HVAC Systems
	Textile Processing Systems
	Pharmaceutical Processing System
	Pulp and Handling Controls

Specifications	Low Output Range (up to 30 psig)	High Output Range (up to 120 psig)
Supply Pressure Range (Min./Max.)	Minimum - 21 kPa(3psig) above maximum output Maximum - 700 kPa (100 psig)	Minimum = 35 kpa (5psig) above maximum output Maximum - 1050 kPa (150 psig)
Supply Pressure Sensitivity	± 0.15% of span per 10kpa (± 0.1 % of span per psig at mid range)	± .005% of span per 7.0 kpa (1.0 psig)
Terminal Based	± 1.0% of Span	± 1.5% of span typical ± 2.0%max.
Linearity	± 0.5% of span	± 1.0% of span
Repeatability	± 1.0% of Span	± 1.0% of span
Hysteresis Response Time	Depends on pressure range typ. less than 0.25 sec. for 3-15 psig units	Depends on pressure range - typ.
Flow Rate	7.6m3/hr(4.5 SCFM) at *175kpa(25psig) supply 20.0m3/hr (12.0 SCFM) at 700 kpa (100 psig) supply	40.8m3/hr(24.0 SCFM) at 1050 pa (150 psig) supply
Relief Capacity	3.4 m3/hr(2SCFM) at 35 kpa (5psig)above 140 kpa (20 psig) set point	11.9m3/hr(7SCFM) at 35kpa (10psig) above 140 kpa (20 psig) set point
Maximum Air Consumption Media	0.3m3/hr(0.15 SCFM) at midrange typical Oil free, clean dry air filtered to 40 microns.	0.15 m3/hr (0.08 SCFM) at midrange typ.
Temp. Range (Operating)	-30°C to 60°C(-20°F to 140°F)
Port Sizes	1/4" NPT (Pneumatic) DIN 43650 connector (Electric)	1/4" NPT (Pneumatic) DIN-43650 connector (Electric)
Weight	2.2 Ibs. (1.0kg) approx.	2.2 lbs.(1.0kg) approx

IP 501			I/P Transducers 500IP
Output Range
Part No.	Input	psi	kpa	lmpedance±1%
IP 501	4-20 mADC	3-15	20-100	200Ώ
IP 502	4-20 mADC	9-15	60-100	110Ώ
IP 503	4-20 mADC	3-9	20-60	110Ώ
IP 504	4-20 mADC	3-27	20-185	240Ώ
IP 505	4-20 mADC	6-30	40-200	240Ώ
IP 506	4-20 mADC	1-17	7-117	270Ώ
IP 507	10-50 mADC	3-15	20-100	90Ώ
IP 508	10-50 mADC	3-27	20-185	105Ώ
IP 509	10-50 mADC	6-30	40-200	105Ώ
IP 510	4-20 mADC	2-60*	14-420	245Ώ
IP 511		3-120*	20-830	280Ώ
IP 512	0-60 mADC	2-120*	15-830	240Ώ
E/P Transducers 500 IP
IP 513	0-5VDC	3-15	20-100	625Ώ
IP 514	0-5VDC	3-17	20-185	550Ώ
IP 515	0-5VDC	6-30	40-200	560Ώ
IP 516	1 -9VDC	3-15	20-100	1010Ώ
IP 517	1 -9VDC	3-27	20-185	860Ώ
IP 518	1 -9VDC	6-30	40-200	860Ώ
IP 519	0-5VDC	2-60*	14-120	520Ώ
IP 520	0-10VDC	3-120*	20-830	825Ώ

* Output shows is as calinrated at at the factory. Large span adjustment capability allows recalibration to achieve output ranges from 20-240 kpa (3-35 psig) to 20-1000kpa (3-145 psig)

I/P Transducers | CairindiaVietnam | Lappro

Information

Customer service

My account

Newsletter