Lappro Automation > 5512A

Nhà sản xuất

Xem tất cả

5512A | AVCON Vietnam

2/2-Way Motorised Control Valves with Electric Actuator for On-Off

Nhà sản xuất: Avcon

Nhận xét sản phẩm

Quantity:

Description

SPECIFICATIONS :
Sizes	15 mm (1/2”) to 150 mm (6”).
Unified Flanges	As per ANSI CI. 150 and PN 16.
Pressure Rating	As per ANSI CI. 150,CI. 300, PN 16 & PN 25.
Pressure Temp. rating	As per ASTM-A-16.34.
Gland Packing	Carbon filled Teflon for temp. Upto 220°C.
Design Standard	ASME B16.34.
Leakage	As per ASME 16.104 CI. IV (0.01% of Kv) for 5512A Series and Class VI Bubble tight for 5512B Series.
Face to Face	As per DIN-3202, Part I Series F1 (All materials).
Testing Standard	As per ISA S 7501.
Type of Plug	On-Off, Equal percentage or Linear.
Seat	Screwed type replaceable.
Body Material	SG Iron-ASTM A536,Gr.60-40-18 (DIN 0.7043) (GGG40.3). CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4408) (GX6 Cr.Ni MO1810) SS-ASTM A351CF8 (DIN1.4301).
Plug Material	SS AISI 420/316.
Seat Ring	SS AISI 420/316.
Spindle	410/316 Ground, Burnished & Hard Chromed.
Studs	ASTM A193 Gr. B7.
Hex. Nuts	ASTM A194 Gr. 2H.
Body Packing	Cr. Ni Foil coated with graphite.
Rangeability	Equal Percentage 30:1, Linear 50:1.
Fluid	Air, Water, Steam, Gas, etc.
Note	5512A are Metal Seated Valves. 5512B are Soft Seated Valves.

ACTUATOR :
Electric Actuator	Series KN.
Housing	Aluminium Silicon alloy heat treated.
Gears	Steel hobbed, toughened gears.
Electric Motor	Single phase, permanent split phase capacitor type class ‘F’ insulated motor.
Electric Supply	220/240,110,24 Volts 50/60 Hz, AC.
Switching cycles	Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).
Actuator Yoke	Steel rods with position indicator assembly or Cast Carbon Steel casting.
Stem Tension	Through belleville packed spring.
Valve Position on Failure of Electricity	Stayput.
Control Suitability	Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.
For further details of Actuator refer to Actuator leaflet ‘KN’ series.

SPECIFICATION TABLE

Catalogue Number	Size	Orifice Size	Flow Factor Kv	Safe Working Pressure	Actuator				Stroke (Approx.)	Travel time (Approx.)
	Size	Orifice Size	Flow Factor Kv	Safe Working Pressure	KN-02	KN-05	KN-10	KN-25	Stroke (Approx.)	Travel time (Approx.)
	(mm)	(mm)	M³/hr.	Bar	Working Pressure (Bar)				mm	Secs.
5512A155 x KN 02/05	15	18	4.0	40	25	40	-	-	20	48
5512A205 x KN 02/05	20	22	6.3	40	25	40	-	-	20	49
5512A255 x KN 02/05	25	25	10	40	20	35	-	-	20	48
5512A405 x KN 02/05	40	40	25	40	10	20	-	-	20/30	48
5512A505 x KN 05/10	50	50	40	40	-	10	40	-	30	80
5512A655 x KN 05/10	65	65	63	40	-	5	30	-	30	80
5512A805 x KN 10	80	80	100	40	-	-	20	-	30	60
5512A1005 x KN 10/25	100	100	160	40	-	-	12	14	30	60
5512A1505 x KN 10/25	150	150	400	40	-	-	4	7	50	100

Note:

(1) When used with letter ‘B’ means Soft Seated, e.g. 5512B505 - not suitable for temperature above 180°C.
(2) For higher working temperature, please refer to leaflet 5512A/WCBF.

2/2 WAY CONTROL VALVES WITH ELECTRIC ACTUATOR

BILL OF MATERIAL

Item	Parts	Material
1	Body	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		SGI
2	Seat	SS AISI 420/ SS AISI 316
3	Gasket	Foil coated with Cr. Ni.Graphite
4	Plug	SS AISI 420/ SS AISI 316
5	Duro Bush	PTFE Lined & coated,
5	Duro Bush	SS backed
6	Bonnet	SS ASTM A351CF8/CF8M
		CS ASTM A 216, Gr. WCB
		SGI
7	Studs/ Nuts	IS 1363, ASTM A193, Gr.B7
7	Studs/ Nuts	IS 1363, ASTM A 194, Gr.2H
8	Gland Packing	Graphited PTFE
9	Gland Nut	SS AISI 304
10	Yoke Nut	CS ASTM A216, Gr. WCB
11	Actuator	Electric Actuator*

* Refer to actuator leaflet for details of components.

TECHNICAL DATA TABLE

Valve Size in mm	15	20	25	40	50	65	80	100	150
Port Sizes 2-way	18	22	25	40	50	65	80	100	150
Kv. M³/hr.	4	6.3	10	25	40	63	100	160	400
Travel	20	20	20	20	30	30	30	30	30
Travel	30	30	30	30	30	30	30	30	50
Electric Actuator	KN 02	KN 02	KN 02	KN 02	KN 05	KN 05	KN10	KN 10	KN 10
Electric Actuator	KN 05	KN 05	KN 05	KN 05	KN 10	KN 10	KN10	KN 25	KN 25

DIMENSIONS (IN MM)

Catalogue Number	Size	Electric Actuator	A	B	C	F x G or ØD	Wt.Kg. (Approx.)	Envelop Size L x H x W (Approx.)	Box Wt. Kg. (Approx.)
Catalogue Number	Inch	Electric Actuator	A	B	C	F x G or ØD	Wt.Kg. (Approx.)	Envelop Size L x H x W (Approx.)	Box Wt. Kg. (Approx.)
5512A/B155 x KN 02	½	KN 02	130	44.5	475	215 x 142	8.5	570 x 240 x 167	10.6*
5512A/B151 x KN 05	½	KN 05	130	44.5	503	Ø178	8.5	598 x 203 x 203	11.5*
5512A/B205 x KN 02	3/4	KN 02	150	49	475	215 x 142	9.5	574 x 240 x 167	11.6*
5512A/B201 x KN 05	3/4	KN 05	150	49	503	Ø178	9.5	602 x 203 x 203	12.5*
5512A/B255 x KN 02	1	KN 02	160	54	508	215 x 142	11.5	612 x 240 x 167	15.5*
5512A/B251 x KN 05	1	KN 05	160	54	535	Ø178	11.5	639 x 203 x 203	16.5*
5512A/B405 x KN 02	1 ½	KN 02	200	63.5	521	215 x 142	15.0	635 x 240 x 167	20.5*
5512A/B401 x KN 05	1 ½	KN 05	200	63.5	550	Ø178	15.0	664 x 203 x 203	22.0*
5512A/B505 x KN 05	2	KN 05	230	76	582	Ø178	20.0	708 x 203 x 203	28.7*
5512A/B501 x KN 10	2	KN 10	230	76	585	Ø225	28.0	811 x 250 x 250	37.0**
5512A/B655 x KN 05	2 ½	KN 10	290	89	602	Ø178	30.0	741 x 203 x 203	40.0**
5512A/B651 x KN 10	2 ½	KN 10	290	89	705	Ø225	36.0	844 x 250 x 250	45.0**
5512A/B805 x KN 05	3	KN 10	310	95.5	725	Ø225	49.0	871 x 250 x 250	60.0**
5512A/B1005 x KN 10	4	KN 10	350	114.5	730	Ø225	65.0	895 x 250 x 250	74.0**
5512A/B1001 x KN 25	4	KN 25	350	114.5	812	Ø260	69.0	977 x 285 x 285	80.0**
5512A/B1505 x KN 10	6	KN 10	480	139.5	788	Ø225	81.0	978 x 250 x 250	90.0**
5512A/B1501 x KN 25	6	KN 25	480	139.5	870	Ø260	85.0	1060 x 285 x 285	96.0**

Note:

* Weight of cardboard + PUF Box Packing. Which may change for Export when packed in wooden box. ** Weight of Wooden Box Packing.

Note:

Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.

5512A | AVCON Vietnam

Thông tin

Dịch vụ khách hàng

Tài khoản của tôi

Đăng ký nhận bản tin