| Mechanical data |
| |
| Design of electrical connection |
Screw connection |
| Conductor with strain relief |
No |
| Cable section |
| - Min. Cable section |
| - Max. Cable section |
1 x 1.5 mm² |
| mechanical installation conditions |
flush |
| Switch distance |
5 mm |
| Reduction factor 1 met (Y/N) |
No |
| Protection circuit |
inductive interference protection, Protection against polarity reversal |
| Pressure resistant (Y/N) |
No |
| Tightening torque for nuts |
A/F 24 max. 1800 Ncm |
| |
| Ambient conditions |
| |
| Ambient temperature |
| - Min. environmental temperature |
−25 °C |
| - Max. environmental temperature |
+70 °C |
| Protection class |
IP67 to IEC/EN 60529 |
| |
| Electrical data |
| |
| Design of control element |
Normally open contact (NO) or Opener (NC) |
| Number of wire |
3 piece |
| Voltage type |
DC, direct current |
| Supply voltage UB |
| - Min. supply voltage |
10 V |
| - Max. supply voltage |
60 V |
| Switch frequency |
approx. 500 Hz |
| Voltage drop Ud |
approx. 1.5 V (400 mA) |
| Operating current Ie |
400 mA |
| No-load current I0 |
approx. 5.5 mA (24 V) |
| |
| Outputs |
| |
| Design of control output |
PNP |
| |
| LED switching conditions display |
| |
| LED switching conditions display (Y/N) |
Yes |
| - yellow LED |
| |
| ATEX |
| |
| Explosion protection categories for gases |
None |
| Explosion protected category for dusts |
None |
| |
| Dimensions |
| |
| Dimensions of the sensor |
| - Length of sensor |
126 mm |
| - Diameter of sensor |
M18 |
| |
| notice |
| |
| Instead of nuts, a mounting clamp can be provided. |
| Programmable by repositioning the plug-in jumper at the terminal screws |
| |