DST Sampling | Leutert Vietnam

DST samplers are capable of capturing downhole samples and recover them within the DST string this procedure has limitations and is considered to be “quick & dirty” sampling. On the other hand, there are several situations where some operators are reluctant to run wireline bottomhole samplers. These include: in HP / HT wells for safety to avoid a high pressure wireline rig up in heavy oil wells because of problems in getting tools downhole through high viscosity fluids in high H2S wells for safety reasons to avoid release of gas during wireline rig up in deep water where moving off location with wire in the hole is considered as high risk company policy which dictates wireline is to be avoided where there is a risk that the well is not properly conditioned for sampling (absence of well testing equipment)
Manufacturer: Leutert
0

Sample Carrier Trigger

Temperature rating: 175°C

LOW PRESSURE SYSTEM

OD (MAX) (IN/MM): 5.390/139.906
ID (MIN) (IN/MM): 2.25/57.15
Length (FT/M): 19/5.8
Burst (PSI): 10140
Collapse (PSI) 10490
Tensile (LBS): 304000
Max Test Pressure: 10,000psi
Top Connection: 3 1/2 Hydril PH-6 Box
Bottom Connection: 3 1/2 Hyrdil PH-6 Pin

HIGH PRESSURE SYSTEM

OD (MAX) (IN/MM): 5.390/139.906
ID (MIN) (IN/MM): 2.25/57.15
Length (FT/M): 19/5.8
Burst (PSI): 17740
Collapse (PSI) 16080
Tensile (LBS): 532000
Max Test Pressure: 15,000psi
Top Connection: 3 1/2 Hydril PH-6 Box
Bottom Connection: 3 1/2 Hyrdil PH-6 Pin