Description:

Instrument for fast material moisture measurement in bales and bulk materials. Universally applicable tool for damage prevention and quality assurance. Both display instrument and insertion probe had been optimized for the agricultural application especially for the following materials (the curves are preset):
    Hay, Flax
    Straw
    Wood Chips
    Grain: Wheat
    Grain: Barley 
A simplified moisture state evaluation is displayed in 9 steps

The 1 m insertion probe with integrated temperature sensor is very suitable to measure in hay or straw bales as well as in bulk material (grain, wood chips) By insertion material moisture and temperature are determined simple and fast. 
The main advantage of the system lies within the ability of comfortable measuring of many measuring spots (bottom, top, weather side...) within one stock in short time - without separate sampling – also moisture accumulations can be detected.
The fast and precise temperature measuring can be used to evaluate decomposition and fermentation processes even if the moisture is already above the measurable range of the instrument (as for example in silage…)

Specifications:

Display instruments GMH 3830:
Display range temperature: -40.0 ... +200.0 °C
Measuring range moisture: 0.0 ... 100.0 % u (referred to dry mass – depending on material curve)
Sensor connections: BNC (moisture) and thermocouple type K socket (Temperature)

Insertion probe GSF 50TF:
Measuring range temperature: 0 ... +100 °C
Measuring range moisture: 0,0 ... 100,0 % u (referred to dry mass – depending on material curve)
length: 110 cm

Scope of supply:
GSF 50 TF incl. BNC/type K cable 1.5 m, GMH 3830  incl. Battery, GMH 38-LW – manual appendix and operating manual