Lappro Automation > 5516A-B

Nhà sản xuất

Xem tất cả

5516A-B | AVCON Vietnam

2/3-Way Motorised Control Valves with Electric Actuator

Nhà sản xuất: Avcon

Nhận xét sản phẩm

Quantity:

Description

SPECIFICATIONS :
Size	20 mm(3/4”) to 100 mm (4”).
Unified Flanges	As per ANSI CI. 150 and PN 16.
Pressure Rating	As per ANSI CI. 150,CI. 300, PN 16 & PN 25.
Pressure Temp. rating.	As per ASTM-A-16.34.
Gland Packing	Carbon Filled Teflon for temp. upto 220°C.
Design Standard	ASME B16.34.
Leakage	As per ASME 16.104 CI.IV (0.01% of Kv) for 5516A Series and Class VI-Bubble tight for 5516B Series.
Face to Face	As per DIN-3202.
Testing Standard	As per ISA S 7501.
Type of Plug	On-Off or Linear.
Seat	Screwed type replaceable.
Body Material	CI-ASTM 126 CI.B(DIN 0.06025 GG25). SG Iron-ASTM A536,Gr.60-40-18 (DIN 0.7043) (GGG40.3). CS-ASTM A 216 WCB (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4410)(G-X10 Cr.Ni MO189) SS-ASTM A351CF8 (DIN1.4301)
Plug Material	SS AISI 420/316.
Seat Ring	SS AISI 420/316.
Spindle	410/316 Ground, Burnished and Hard Chromed.
Studs	ASTM A193 Gr. B7.
Hex. Nuts	ASTM A194 Gr. 2H.
Body Packing	Cr. Ni Foil coated with graphite.
Rangeability	Linear 50:1.
Fluid	Air, Water, Steam, Gas, etc.
Note	5516A are Metal Seated Valves. 5516B are Soft Seated Valves.

ACTUATOR :
Electric Actuator	Series KN.
Housing	Aluminium Silicon alloy heat treated.
Gears	Steel hobbed, toughened gears.
Electric Motor	Single phase, permanent split phase capacitor type class ‘F’ insulated motor.
Electric Supply	220/240,110,24 Volts 50/60 Hz, AC.
Switching cycles	Upto 240 cys per hour for small size valves and for large size valves refer to AVCON. (Switching cycles is meant for duration of less than 0.1 second).
Actuator Yoke	Steel rods with position indicator assembly.
Stem Tension	Through belleville packed spring.
Valve Position on Failure of Electricity.	Stayput.
Control Suitability	Actuator is suitable for On-Off, Anticipatory, PI, PID Control system.
For further details of Actuator refer to Actuator leaflet KN’ series.

SPECIFICATION TABLE

Catalogue Number	Size	Orifice	Kv	Safe Working. Pressure.	Actuator			Stroke (Approx.)	Travel time (Approx.)
	Size	Orifice	Kv	Safe Working. Pressure.	KN-02	KN-05	KN-10	Stroke (Approx.)	Travel time (Approx.)
	(mm)	(mm)	M³ /hr.	Bar	Working Pressure (Bar)			mm	Secs
5516A205	20	21/25	6.3	40	25	40	-	20	49
5516A255	25	27/27	10	40	20	35	-	20	48
5516A405	40	40/40	25	40	12	20	-	20/30	48
5516A505	50	50/50	40	40	-	20	40	30	80
5516A655	65	65/60	63	40	-	10	30	30	80
5516A805	80	80/75	100	40	-	5	20	30	60
5516A1005	100	100/101	180	40	-	2	12	30	60

Note:

(1) When used with letter ‘B’ means Soft Seated, e.g. 5516B505 - not suitable for temperature above 180°C.
(2) For higher working temperature, please refer to leaflet 5516A/CSF.

3/2 WAY CONTROL VALVES WITH ELECTRIC ACTUATOR

BILL OF MATERIAL

Item	Parts	Material
1	Body	SS ASTM A351CF8/CF8M
		CS ASTM A216, Gr. WCB
		CI, SGI
2	Seat	SS AISI 420/ SS AISI 316
3	Gasket	Foil coated with Cr. Ni.Graphite
4	Plug	SS AISI 420/ SS AISI 316
5	Duro Bush	PTFE Lined & coated,
5	Duro Bush	SS as backed.
6	Bonnet	SS ASTM A351CF8/CF8M CS ASTM A216, Gr. WCB CI, SGI
7	Studs/ Nuts	IS 1363, ASTM A193, Gr.B7 IS 1363, ASTM A 194 Gr.2H
8	Gland Packing	Graphited PTFE
9	Gland Nut	SS AISI 304
10	Yoke Nut	CS ASTM A216, Gr. WCB
11	Actuator	Electric Actuator*

*Refer to actuator leaflet for details of components.

TECHNICAL DATA TABLE
Valve Size mm			20	25	40	50	65	80	100
5516 Mixing	Port size	Upper ‘A’ Port	21	27	40	50	65	80	101
		Lower ‘B’ Port	25	27	40	50	60	75	101
	Kv. M³/hrs.		6.3	10	25	40	63	100	160
Travel			20	20	20	30	30	30	30
					30
Electric Actuator			KN02	KN02	KN02	KN05	KN05	KN10	KN10
						KN10	KN10

DIMENSIONS (IN MM)

Catalogue Number	Size	Electric Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size LxHxW (Approx.)	Box Wt. Kg. (Approx.)
Catalogue Number	Inch	Electric Actuator	A	B	C	ØD	W	Wt.Kg. (Approx.)	Envelop Size LxHxW (Approx.)	Box Wt. Kg. (Approx.)
5516A/B 205	3/4	KN02	150	70	503	178	178	9.9	600 x 205 x 205	13.0*
5516A/B 255	1	KN02	160	75	535	178	178	11.9	640 x 205 x 205	15.5*
5516A/B 355	1 ½	KN02	200	90	550	178	178	17.8	670 x 225 x 205	23.0*
5516A/B 505	2	KN05	230	100	582	178	178	24.0	715 x 260 x 205	29.0*
5516A/B 515	2	KN10	230	100	685	225	225	30.0	815 x 260 x 260	35.0*
5516A/B 655	2 ½	KN05	290	120	602	178	178	32.2	755 x 320 x 205	38.0**
5516A/B 665	2 ½	KN10	290	120	705	225	225	39.0	855 x 320 x 260	48.0**
5516A/B 805	3	KN10	310	130	725	225	235	52.0	855 x 340 x 270	61.0**
5516A/B 1005	4	KN10	350	150	730	225	235	69.0	915 x 380 x 270	80.0**

Note:

* Weight of cardboard + PUF Box Packing, Which may change for Export when packed in wooden box.
**Weight of Wooden Box Packing.

Note:

Technical specifications details & dimensions are subject to change without prior notice.
Dimensions in the table are approximate subject to final confirmation by AVCON.

5516A-B | AVCON Vietnam

Thông tin

Dịch vụ khách hàng

Tài khoản của tôi

Đăng ký nhận bản tin