| Model 415N4 |
Process Analyzer for Trace Oxygen by Electrochemical Sensor, Wall Mounted NEMA4 (IP65) Enclosure Rating |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|
| Model 415N4X |
Process Analyzer for Trace Oxygen by Electrochemical Sensor, Wall Mounted Corrosion-resistant NEMA4X (IP65) Enclosure Rating |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|
| Model 415RM |
Process Analyzer for Trace Oxygen by Electrochemical Sensor, 19" (483mm) Rack Mounted, on Sliding Rails |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|
| Model 415N7MC |
Process Analyzer for Trace Oxygen by Electrochemical Sensor, Wall Mounted NEMA7 UL/CSA Explosion-proof with Non-intrusive Magnetic Calibration, Class 1 Div 1 Group BCD |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|
| Model 415RMN7 |
Process Analyzer for Trace Oxygen by Electrochemical Sensor, ex-proof sensor housing with rack mount control cabinet (two separate enclosures) |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|
| Model 415D2 |
Model 415 with NEMA 4 cabinet with Hazardous Area Purge System; available for Class 1 Div1 & Div2 hazardous areas |
±1 PPM |
O2 sensor may require an initial purge down from air to low PPM O2which may last up to 6 hours. After purge, T90 response from 1000 to 0 PPM O2 is 30 seconds. |
115 VAC, 60 Hz220 VAC, 50 Hz |
|
|